From owner-kxt@nccom.com Sat Sep 01 07:14:41 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dBXj-0000fP-00 for kxt-outgoing@nccom.com; Sat, 1 Sep 2001 07:14:39 -0700 Message-ID: <000f01c132f0$8439b9c0$0300a8c0@verizon.net> From: "Charles Patterson" To: "Richard McCoy" , References: Subject: KX-T: Re: Fax Benefit Date: Sat, 1 Sep 2001 10:15:11 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk As Carl said, the main thing is being able to use that extra line. Some of my customers keep their main lines in one trunk group so outgoing calls only use the fax line when the main lines are busy. There are a couple of other uses too. If you get a stray fax coming in on another voice line, you can transfer it to the fax machine ext to see who's sending it. If you're using fax detection (from the voicemail or disa card) then you can have faxes come in on rollover lines and have more than one machine on multiple extensions to handle them. Charles PS Did you get that ksu working? ----- Original Message ----- From: "Richard McCoy" To: Sent: Saturday, September 01, 2001 1:11 AM Subject: KX-T: Fax Benefit > What are the benefits of connecting an external fax to an ext in a KXTD1232, instead of just having the fax attached to that line alone? > > > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 01 11:17:38 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dFKq-0000ig-00 for kxt-outgoing@nccom.com; Sat, 1 Sep 2001 11:17:36 -0700 X-Originating-IP: [63.31.52.214] From: "MCS Man" To: charles@avtele.com, rick@lopezislandpharmacy.com, kxt@kxthelp.com Bcc: Subject: Re: KX-T: Re: Fax Benefit Date: Sat, 01 Sep 2001 18:17:03 +0000 Mime-Version: 1.0 Content-Type: text/html Message-ID: X-OriginalArrivalTime: 01 Sep 2001 18:17:03.0371 (UTC) FILETIME=[4CC855B0:01C13312] Sender: owner-kxt@nccom.com Precedence: bulk
>----- Original Message -----
>From: "Richard McCoy"
>To:
>Sent: Saturday, September 01, 2001 1:11 AM
>Subject: KX-T: Fax Benefit
>
>
> > What are the benefits of connecting an external fax to an ext in a

>KXTD1232, instead of just having the fax attached to that line alone?

 

Even if everybody is blocked from using the fax line for either incoming or outgoing voice calls, it can still be nice to have the fax as an extension, with its line going throught the system.

Often, the only time you know the fax line has died is when somebody calls to tell you your fax isn't answering - tell them to dial an alternate (voice number) and transfer the call when it comes in.  Dial access another trunk group for outgoing. 

Still receive faxes in spite telco's best effort to thwart you!


Get your FREE download of MSN Explorer at http://explorer.msn.com
********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 01 12:37:53 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dGaW-0000jS-00 for kxt-outgoing@nccom.com; Sat, 1 Sep 2001 12:37:52 -0700 From: Steve Rosen Subject: KX-T: Getting Analog Phones to Auto Pickup To: kxt@kxthelp.com Message-Id: Date: Sat, 1 Sep 2001 12:37:49 -0700 Sender: owner-kxt@nccom.com Precedence: bulk I want to know how I can get an analog phone to automatically pickup the ringing CO line when I pick up the headset. Not I enter "40" and it does that, but I don't want it to do that, I want to answer it like a normal phone? Anyway to do this even for 1 of the 3 CO lines and turning off the other 2? I use it as the normal hosue phone and don't really care about 2 of the 3 CO lines. ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 01 14:05:55 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dHxh-0000ka-00 for kxt-outgoing@nccom.com; Sat, 1 Sep 2001 14:05:53 -0700 Message-Id: <3.0.6.32.20010901170531.009d3618@wcnet.org> X-Sender: cnavarro@wcnet.org X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Sat, 01 Sep 2001 17:05:31 -0400 To: Steve Rosen , kxt@kxthelp.com From: Carl Navarro Subject: Re: KX-T: Getting Analog Phones to Auto Pickup In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-kxt@nccom.com Precedence: bulk At 12:37 PM 9/1/2001 -0700, Steve Rosen wrote: > >I want to know how I can get an analog phone to automatically >pickup the ringing CO line when I pick up the headset. > >Not I enter "40" and it does that, but I don't want it to >do that, I want to answer it like a normal phone? Anyway >to do this even for 1 of the 3 CO lines and turning off the >other 2? I use it as the normal hosue phone and don't >really care about 2 of the 3 CO lines. Some English translation is required in the above question, but I guess you're asking if you can make a phone answer a ringing line. The answer is yes, but only if it's ringing. You didn't say what system, but you simply program the incoming CO to ring that extension and it's done. Carl Navarro ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 01 16:50:41 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dKX9-0000ly-00 for kxt-outgoing@nccom.com; Sat, 1 Sep 2001 16:50:39 -0700 Message-ID: <003901c13340$fb0029e0$0300a8c0@verizon.net> From: "Charles Patterson" To: "Steve Rosen" , References: Subject: KX-T: Re: Getting Analog Phones to Auto Pickup Date: Sat, 1 Sep 2001 19:51:11 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk Steve, The standard single line analog phone will answer a line IF that line is ringing on that phone. If the analog phone is programmed to NOT ring, then you will need enter a code to have it answer, or change the ring programming. You can program "pick-up dialing" to make the phone automatically dial the "40" or other code, but that may bother people when they try to dial out. If you have a simple phone with a bunch of speed dial button, you might try programming them to dial the codes and label accordingly. I think your system is digital... KXTD codes: 4* = pick up ringing co line 40 = pick up a ringing phone in your ext. group 41 xxx = pick up a specific ext. that's ringing (ext. xxx) good luck Charles PS (Carl needs to study more email-englihs, thne it all maeks sense. Not = now, hosue = house) > Not I enter "40" and it does that, but I don't want it to > do that, I want to answer it like a normal phone? Anyway > to do this even for 1 of the 3 CO lines and turning off the > other 2? I use it as the normal hosue phone ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 01 19:36:26 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dN7X-0000nV-00 for kxt-outgoing@nccom.com; Sat, 1 Sep 2001 19:36:23 -0700 Message-Id: <3.0.5.32.20010901223108.007fd180@pop.mindspring.com> X-Sender: jgary@pop.mindspring.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Sat, 01 Sep 2001 22:31:08 -0400 To: kxt@kxthelp.com From: J Gary Mull Subject: KX-T: TVS-50 Programming Question Mime-Version: 1.0 Content-Type: text/enriched; charset="us-ascii" Sender: owner-kxt@nccom.com Precedence: bulk If one creates a Caller ID Routing Parameter does the call ALWAYS go where ever one has programmed both day and night modes? I was thinking on programming a specific number to a mailbox, however, if that number were to call during "Night Mode" I would not want it to go to a mailbox. Gary ____ ~ ~ ~~__ _|OO|__[]_[]___\/ \___|_________|_|_ 'oo "-O=O=O-" oo\ jgary@atl.mindspring.com Gary at Home jgmull@us.ibm.com Gary at Work ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 01 21:39:15 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dP2P-0000or-00 for kxt-outgoing@nccom.com; Sat, 1 Sep 2001 21:39:13 -0700 Reply-To: From: "Steve Ponnath" To: Subject: KX-T: RE: DND and Call Forwarding Date: Sat, 1 Sep 2001 23:38:46 -0500 Message-ID: <003201c13369$27f9ceb0$0400a8c0@ponnath_port.birch.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Importance: Normal Sender: owner-kxt@nccom.com Precedence: bulk I am setting up a KXTD1232 and 7433 phones, 4 COs and 12 extensions. I dont seem to have DND and Call Forwarding setup correctly. I can place the phone in DND or Call Forwarding and the station still rings in. This seems to be the case whether its from a CO or station to station. Since I am new to this, I must be missing some concept here. I may be not understanding how these features are controlled and I may be allowing the station settings to be overridden. I have read the manuals but it's not coming to me yet. Any help is appreciated as I really don't want to spend the weekend at the office. Thanks. ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sun Sep 02 06:58:20 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dXlS-0000yz-00 for kxt-outgoing@nccom.com; Sun, 2 Sep 2001 06:58:18 -0700 Message-ID: <001e01c133b7$66866500$0300a8c0@verizon.net> From: "Charles Patterson" To: , References: <003201c13369$27f9ceb0$0400a8c0@ponnath_port.birch.net> Subject: KX-T: Re: RE: DND and Call Forwarding Date: Sun, 2 Sep 2001 09:58:52 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk The forwarding is a sort of 2-step process. First you program the button for the type of forwarding you want it to do, then you can toggle it on/off by pressing the button while the phone is still on hook. If you have programmed both DND and forwarding, then the button will toggle between Off/DND/Fwd. Here are some examples: To program the button to forward calls busy/no answer to voicemail, go off hook (pick up handset) press FWD 5 165 hang up To program the button to forward calls to an outside number go off hook press FWD 6 9 [the number to dial] hang up To program DND go off hook press FWD 1 hang up To cancel all FWD or DND go off hook press FWD 0 hang up Now, to turn it on Do NOT pick up the phone press FWD button The display will tell you what it is set for. Press FWD again to toggle through the DND FWD or OFF. The default for the LED is a solid light is DND and flashing light light is FWD (that can ge changed in the -4 systems though) Hope this helps your weekend! charles ----- Original Message ----- From: "Steve Ponnath" To: Sent: Sunday, September 02, 2001 12:38 AM Subject: KX-T: RE: DND and Call Forwarding > I am setting up a KXTD1232 and 7433 phones, 4 COs and 12 extensions. > > I dont seem to have DND and Call Forwarding setup correctly. I can place the > phone in DND or Call Forwarding and the station still rings in. This seems > to be the case whether its from a CO or station to station. > > Since I am new to this, I must be missing some concept here. I may be not > understanding how these features are controlled and I may be allowing the > station settings to be overridden. > > I have read the manuals but it's not coming to me yet. > > Any help is appreciated as I really don't want to spend the weekend at the > office. > > Thanks. > > > > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sun Sep 02 07:50:16 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dYZi-0000za-00 for kxt-outgoing@nccom.com; Sun, 2 Sep 2001 07:50:14 -0700 Message-ID: <001001c133be$84342fe0$61d13ccc@james.a.schultz> From: "jimschultz" To: "Pana Help" Subject: KX-T: Ring groups and VM Date: Sun, 2 Sep 2001 10:49:40 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3155.0 x-mimeole: Produced By Microsoft MimeOLE V4.72.3155.0 Sender: owner-kxt@nccom.com Precedence: bulk Hope everyone is having a great Labor Day weekend..... I'm putting together a TD 1232-4 & a TVS 50 for a small car dealership....would like to have "Dial 1 for sales..etc and have it go to the 5 sales dept. sets.....no problem using a seperate ring group for them, and directing the VM to it. The problem is that when you set the individual stations to FWD BUSY/NA, they no longer ring with the group. Probably no biggie, but the only way then to internally leave a message in the extensions box is to dial 165, #6, and the ext #......am I missing something?......other than a few brain cells??.....(those darn 60's.....)... Thanks for any thoughts/help. Jim Schultz Schultz Communications ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sun Sep 02 09:18:35 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dZxB-00010f-00 for kxt-outgoing@nccom.com; Sun, 2 Sep 2001 09:18:33 -0700 Reply-To: From: "Steve Ponnath" To: "'Charles Patterson'" , Subject: RE: KX-T: Re: RE: DND and Call Forwarding Date: Sun, 2 Sep 2001 11:18:07 -0500 Message-ID: <000801c133ca$da607750$0400a8c0@ponnath_port.birch.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 In-Reply-To: <001e01c133b7$66866500$0300a8c0@verizon.net> Importance: Normal Sender: owner-kxt@nccom.com Precedence: bulk I did the programming at the phone. then, I hit the fwd button to dnd and to fwd to try each. in every case, the phone would still ring when called from a co or from another extension. that's why I believe i am not using cos or something else (system setting) correctly. -----Original Message----- From: owner-kxt@nccom.com [mailto:owner-kxt@nccom.com]On Behalf Of Charles Patterson Sent: Sunday, September 02, 2001 8:59 AM To: sponnath@technologist.com; kxt@kxthelp.com Subject: KX-T: Re: RE: DND and Call Forwarding The forwarding is a sort of 2-step process. First you program the button for the type of forwarding you want it to do, then you can toggle it on/off by pressing the button while the phone is still on hook. If you have programmed both DND and forwarding, then the button will toggle between Off/DND/Fwd. Here are some examples: To program the button to forward calls busy/no answer to voicemail, go off hook (pick up handset) press FWD 5 165 hang up To program the button to forward calls to an outside number go off hook press FWD 6 9 [the number to dial] hang up To program DND go off hook press FWD 1 hang up To cancel all FWD or DND go off hook press FWD 0 hang up Now, to turn it on Do NOT pick up the phone press FWD button The display will tell you what it is set for. Press FWD again to toggle through the DND FWD or OFF. The default for the LED is a solid light is DND and flashing light light is FWD (that can ge changed in the -4 systems though) Hope this helps your weekend! charles ----- Original Message ----- From: "Steve Ponnath" To: Sent: Sunday, September 02, 2001 12:38 AM Subject: KX-T: RE: DND and Call Forwarding > I am setting up a KXTD1232 and 7433 phones, 4 COs and 12 extensions. > > I dont seem to have DND and Call Forwarding setup correctly. I can place the > phone in DND or Call Forwarding and the station still rings in. This seems > to be the case whether its from a CO or station to station. > > Since I am new to this, I must be missing some concept here. I may be not > understanding how these features are controlled and I may be allowing the > station settings to be overridden. > > I have read the manuals but it's not coming to me yet. > > Any help is appreciated as I really don't want to spend the weekend at the > office. > > Thanks. > > > > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sun Sep 02 10:48:18 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dbM0-00011W-00 for kxt-outgoing@nccom.com; Sun, 2 Sep 2001 10:48:16 -0700 Message-ID: <007201c133d7$8670a900$0300a8c0@verizon.net> From: "Charles Patterson" To: , References: <000801c133ca$da607750$0400a8c0@ponnath_port.birch.net> Subject: Re: KX-T: Re: RE: DND and Call Forwarding Date: Sun, 2 Sep 2001 13:48:50 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk Is it really ringing when called from an extension? If it rings from a co and the ext ringing is set dil 1:n (ringing at multiple extensions), then the forwarding will not stop that. The forwarding will only work for ext to ext calls and dil 1:1. I assume when you press the fwd button it does show on the display what type of forwarding it is setting to? The great mysteries of life. (try using a larger hammer?) ----- Original Message ----- From: "Steve Ponnath" To: "'Charles Patterson'" ; Sent: Sunday, September 02, 2001 12:18 PM Subject: RE: KX-T: Re: RE: DND and Call Forwarding > I did the programming at the phone. then, I hit the fwd button to dnd and to > fwd to try each. in every case, the phone would still ring when called from > a co or from another extension. that's why I believe i am not using cos or > something else (system setting) correctly. > > > > -----Original Message----- > From: owner-kxt@nccom.com [mailto:owner-kxt@nccom.com]On Behalf Of > Charles Patterson > Sent: Sunday, September 02, 2001 8:59 AM > To: sponnath@technologist.com; kxt@kxthelp.com > Subject: KX-T: Re: RE: DND and Call Forwarding > > > The forwarding is a sort of 2-step process. First you program the button > for the type of forwarding you want it to do, then you can toggle it on/off > by pressing the button while the phone is still on hook. > If you have programmed both DND and forwarding, then the button will toggle > between Off/DND/Fwd. > > Here are some examples: > > To program the button to forward calls busy/no answer to voicemail, > go off hook (pick up handset) > press FWD 5 165 > hang up > > To program the button to forward calls to an outside number > go off hook > press FWD 6 9 [the number to dial] outside line> > hang up > > To program DND > go off hook > press FWD 1 > hang up > > To cancel all FWD or DND > go off hook > press FWD 0 > hang up > > Now, to turn it on > Do NOT pick up the phone > press FWD button > The display will tell you what it is set for. > Press FWD again to toggle through the DND FWD or OFF. > > The default for the LED is a solid light is DND and flashing light light is > FWD (that can ge changed in the -4 systems though) > > Hope this helps your weekend! > charles > > ----- Original Message ----- > From: "Steve Ponnath" > To: > Sent: Sunday, September 02, 2001 12:38 AM > Subject: KX-T: RE: DND and Call Forwarding > > > > I am setting up a KXTD1232 and 7433 phones, 4 COs and 12 extensions. > > > > I dont seem to have DND and Call Forwarding setup correctly. I can place > the > > phone in DND or Call Forwarding and the station still rings in. This seems > > to be the case whether its from a CO or station to station. > > > > Since I am new to this, I must be missing some concept here. I may be not > > understanding how these features are controlled and I may be allowing the > > station settings to be overridden. > > > > I have read the manuals but it's not coming to me yet. > > > > Any help is appreciated as I really don't want to spend the weekend at the > > office. > > > > Thanks. > > > > > > > > > > > > > > ********************************************************* > > * To unsubscribe, e-mail kxt-request@kxthelp.com * > > * The KXT-Digest Home Page: http://kxthelp.com/ * > > ********************************************************* > > > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sun Sep 02 11:03:57 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dbbA-000123-00 for kxt-outgoing@nccom.com; Sun, 2 Sep 2001 11:03:56 -0700 Message-ID: <007801c133d9$b71dfc40$0300a8c0@verizon.net> From: "Charles Patterson" To: "jimschultz" , "Pana Help" References: <001001c133be$84342fe0$61d13ccc@james.a.schultz> Subject: KX-T: Re: Ring groups and VM Date: Sun, 2 Sep 2001 14:04:30 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk Hi Jim, There are better ways (my last suggestion is the best, the first two are just for information sake). Don't worry, your 60's experiences may help you understand the concepts better... When a call goes to the 5 sets, intercept routing can take over and pull it back to the voicemail so you won't need to use forwarding. Also, forwarding will never work when a call is ringing on multiple extensions. Intercept routing will only bring the call back to the main custom menu this way I think. You would need to have a "leave message" option on the menu. OR... if the sales desks do not need individual mailboxes, you can put them together in a TVS extension group. That is a voicemail programming feature that lets a group of extensions share one mailbox. The message lamp will light on all phones in the group. But they cannot have individual boxes. OR... THE best solution: Set up a phantom extension for the sales people (let's call it 200). Set up a new mailbox-200 and assign the phantom ext number to that mailbox. Program a button on each of their phones for that phantom extension. Also program a button right under it for message waiting for that mailbox. Make sure intercept routing is set to ext. 165. Now set the custom menu to call ext 200 when option "1 for sales" is pressed. It will ring all the phones with the phantom button, then after the intercept time it will go to mailbox 200. (Set the intercept timer for the number of rings before it goes to voicemail. default is 12, I usually use 4 or 5 rings). This works well, you just have to give up some buttons. Charles charles@avtele.com Global Communications Tarrytown, NY www.avtele.com www.telephonesecurity.com ----- Original Message ----- From: "jimschultz" To: "Pana Help" Sent: Sunday, September 02, 2001 10:49 AM Subject: KX-T: Ring groups and VM > Hope everyone is having a great Labor Day weekend..... > I'm putting together a TD 1232-4 & a TVS 50 for a small car > dealership....would like to have "Dial 1 for sales..etc and have it go to > the 5 sales dept. sets.....no problem using a seperate ring group for them, > and directing the VM to it. The problem is that when you set the individual > stations to FWD BUSY/NA, they no longer ring with the group. Probably no > biggie, but the only way then to internally leave a message in the > extensions box is to dial 165, #6, and the ext #......am I missing > something?......other than a few brain cells??.....(those darn 60's.....)... > Thanks for any thoughts/help. > > Jim Schultz > Schultz Communications > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 01:41:24 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dpII-00019V-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 01:41:22 -0700 From: Aleksandr Deulin Subject: KX-T: KX-T1232 Problem. To: kxt@kxthelp.com Message-Id: Date: Mon, 3 Sep 2001 01:41:19 -0700 Sender: owner-kxt@nccom.com Precedence: bulk Hello All! I have an dual cabinet 1232. After installing 2x4CO expansion cards and registering it in a system (109->"C;A1;A2"+Save+Power on/off) I`ve got an 24 CO lines. It`s a wonderful! But after 2 days I`ve got an message on screen of my phone "CO not assigned" for these 8 CO. Where my mistake? ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 08:13:37 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dvPp-0001Gi-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 08:13:33 -0700 From: Jody Subject: KX-T: KXT 1232 Doorphone To: kxt@kxthelp.com Message-Id: Date: Mon, 3 Sep 2001 08:13:28 -0700 Sender: owner-kxt@nccom.com Precedence: bulk Can anyone tell me where the Doorphone adapter connects into the KXT 1232. my supplier has given me a KX-T30860 adaptor the same one that goes on the 308 and 616 KXT and asures me that this one also goes on the 1232 KXT ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 08:35:49 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dvlL-0001H2-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 08:35:47 -0700 Message-ID: <000801c1348d$e0076a60$0200a8c0@u9h9i3> Reply-To: "Randy Dell" From: "Randy Dell" To: "Jody" , Subject: Re: KX-T: KXT 1232 Doorphone Date: Mon, 3 Sep 2001 08:34:09 -0700 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-kxt@nccom.com Precedence: bulk This is not the adapter for the KXT123211D or the KXTD1232 rd -----Original Message----- From: Jody To: kxt@kxthelp.com Date: Monday, September 03, 2001 8:13 AM Subject: KX-T: KXT 1232 Doorphone Can anyone tell me where the Doorphone adapter connects into the KXT 1232. my supplier has given me a KX-T30860 adaptor the same one that goes on the 308 and 616 KXT and asures me that this one also goes on the 1232 KXT ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 08:41:48 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dvr8-0001HP-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 08:41:46 -0700 Message-ID: <000c01c1348e$be285840$0200a8c0@u9h9i3> Reply-To: "Randy Dell" From: "Randy Dell" To: Subject: KX-T: doorphone Date: Mon, 3 Sep 2001 08:40:22 -0700 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-kxt@nccom.com Precedence: bulk Sorry, brain fart, too early on day off. If you have a kxt123211d this is the correct card, it plugs into the CPU, make sure you turn off the system first. If you have a kxtd1232, wrong card. rd ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 08:47:51 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dvx0-0001Hj-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 08:47:50 -0700 Message-Id: <3.0.6.32.20010903114729.009d3618@wcnet.org> X-Sender: cnavarro@wcnet.org X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Mon, 03 Sep 2001 11:47:29 -0400 To: Jody , kxt@kxthelp.com From: Carl Navarro Subject: Re: KX-T: KXT 1232 Doorphone In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-kxt@nccom.com Precedence: bulk At 08:13 AM 9/3/2001 -0700, Jody wrote: >Can anyone tell me where the Doorphone adapter connects into the KXT 1232. my supplier has given me a KX-T30860 adaptor the same one that goes on the 308 and 616 KXT and asures me that this one also goes on the 1232 KXT He didn't lie if you have an analog 123211D and a 30860D. The plug is on the CPU card and the unit sits on the top shelf. Of course, you need the 30865 intercom unit (up to 2). If you have a digital 1232, you need a TD-160 module. Carl Navarro ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 08:59:40 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dw8Q-0001IO-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 08:59:38 -0700 To: dio@shaaz.ru Cc: kxt@kxthelp.com Date: Mon, 3 Sep 2001 11:57:21 -0400 Subject: Re: KX-T: KX-T1232 Problem. Message-ID: <20010903.120507.-581963.18.dr.dongle@juno.com> X-Mailer: Juno 5.0.33 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Juno-Line-Breaks: 2-20,22-25 From: Chris L Snyder Sender: owner-kxt@nccom.com Precedence: bulk sounds like you lost "synch" between cabinets, power down then back up and NO activity for 5 mimits. If nessary pull the RJ21 and station cables to prevent activity. On Mon, 3 Sep 2001 01:41:19 -0700 Aleksandr Deulin writes: > Hello All! > I have an dual cabinet 1232. After installing 2x4CO expansion cards > and registering it in a system (109->"C;A1;A2"+Save+Power on/off) > I`ve got an 24 CO lines. It`s a wonderful! But after 2 days I`ve got > an message on screen of my phone "CO not assigned" for these 8 CO. > Where my mistake? > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > All that is necessary for EVIL to triumph is for good people to do NOTHING! -Edmund Burke- Chris Snyder KD4 OGD Cosby, Tn. dr.dongle@juno.com Stop the madness...vote LIBERTARIAN ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/tagj. ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 11:34:48 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15dyYY-0001KF-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 11:34:46 -0700 From: Jacques Leisy Subject: KX-T: Low volume on KXTD308 To: kxt@kxthelp.com Message-Id: Date: Mon, 3 Sep 2001 11:34:42 -0700 Sender: owner-kxt@nccom.com Precedence: bulk The volume is way to low. People are complaining they cannot hear us, and we have trouble hearing them as well. What is the proper setting in the 900 menu for the CO line attenuation: 0 or 1. The documentation is not quite clear! I had Verizon (!) check the line and according to them everything is fine up to the CO box. On one of the CO line I'm also getting a lot of static noise. I there anything to adjust (like gain) inside the TD308? Thanks JL ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Mon Sep 03 23:22:28 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15e9bO-0001Po-00 for kxt-outgoing@nccom.com; Mon, 3 Sep 2001 23:22:26 -0700 From: "CTI Mail" To: "KXT" Subject: KX-T: KXT Doorphone Date: Tue, 4 Sep 2001 07:21:20 +0100 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0002_01C13512.31EA32C0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Importance: Normal Sender: owner-kxt@nccom.com Precedence: bulk This is a multi-part message in MIME format. ------=_NextPart_000_0002_01C13512.31EA32C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Thanks to everyone for the speedy response to my Door phone question on the KXT That is except for Faxtel Corp who sent me an infected file attached to the email Thankfully my anti virus picked it up before it could do any damage Jody ------=_NextPart_000_0002_01C13512.31EA32C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Thanks to everyone for the speedy response to my Door phone = question on the KXT

 

That is except for Faxtel Corp who sent me an infected file = attached to the email

 

Thankfully my anti virus picked it up before it could do any = damage

 

Jody

------=_NextPart_000_0002_01C13512.31EA32C0-- ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Tue Sep 04 08:42:55 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15eILm-0001Xr-00 for kxt-outgoing@nccom.com; Tue, 4 Sep 2001 08:42:54 -0700 From: Imre Sandor Subject: KX-T: ISDN DDI To: kxt@kxthelp.com Message-Id: Date: Tue, 4 Sep 2001 08:42:48 -0700 Sender: owner-kxt@nccom.com Precedence: bulk Hi folks, I have a problem with a KX-TD1232. There is a 6-port ISDN BRI adapter installed in the system, on which 3 ports are configured as CO, the other 3 as EXTENSION. The extenstions have L1 and L2 mode set to Call, access mode is P-MP, TEI assigned automatically, MSN is disabled and Extension tone is Enabled. The ports are assigned to extenstion 551, 552 and 553 respectively, (on ISDN Internal 1), CLIP is not set. I attach an ISDN TA to one of the ports on which I can establish PPP connection with the other party, but the callback cannot go through. What did I miss to set? Any ideas? Imre ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Tue Sep 04 10:57:18 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15eKRo-0001ZZ-00 for kxt-outgoing@nccom.com; Tue, 4 Sep 2001 10:57:16 -0700 From: "ddav- collin" To: Subject: RE: KX-T: KXT-TA624 & parallel phones Date: Tue, 4 Sep 2001 12:50:55 -0500 Message-ID: <000801c1356a$26381660$0200000a@ddavco> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 In-Reply-To: Sender: owner-kxt@nccom.com Precedence: bulk Duh! I figured out the background music option was on, which causes the feedback.... BGM is not an option when using parallel phones... Collin Loewen Data Display A/V Corp 713 688-7900 www.ddav.com -----Original Message----- From: owner-kxt@nccom.com [mailto:owner-kxt@nccom.com]On Behalf Of C. Loewen Sent: Monday, August 27, 2001 9:56 AM To: kxt@kxthelp.com Subject: KX-T: KXT-TA624 & parallel phones Hi, I am trying to get an SLT and a KX-T7030 phone to work in parallel on a KXT-TA624 hybrid system (analog). I have tried two different phones (SLT and KX-T7030), programmed the jack for second phone, swapped out HL and RT wires, and still when I try to get a dial tone on the SLT phone, the speaker phone on the KX-X7030 comes on, no dial tone, just lots o' feedback. What's strange is the SLT can answer incoming calls OK, and the KX-T7030 otherwise works fine. Any ideas? Thanks! C. Loewen Data Display A/V www.ddav.com ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 09:07:49 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15efDP-0001qE-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 09:07:47 -0700 From: David Stanhope Subject: KX-T: dash 5 firmware To: kxt@kxthelp.com Message-Id: Date: Wed, 5 Sep 2001 09:07:43 -0700 Sender: owner-kxt@nccom.com Precedence: bulk I have a dash 3 KXTD1232 and am about to purchase the dash 4 roms but was wondering if any hints if will be dash 5 roms and if so can a dash 3 use them and any general idea about when they might be release in the US, don't want to fork out the upgrade fee twice if don't have to. Thanks Dave dms@stanhope.org ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 09:55:40 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15efxi-0001qi-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 09:55:38 -0700 From: Panman2424@aol.com Message-ID: <23.10d7a958.28c7b2d7@aol.com> Date: Wed, 5 Sep 2001 12:54:47 EDT Subject: Re: KX-T: dash 5 firmware To: dms@stanhope.org, kxt@kxthelp.com MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: AOL 5.0 for Windows sub 40 Sender: owner-kxt@nccom.com Precedence: bulk In the bata test we are doing they only wanted a dash 4, They mailed the chips and the new door card (KX-TD161) , The Dash 5 other then using 4 door phones, Or 8 to double cabinet, It has improved UCD/Ringing function, UCD/Ring Queue monitor, new voice mail featurs, synchronize date & time between TD1232 and voice mail, Auto recovery the 2 TD1232 will reset itself, just a small part of the upgrade, I bet the -3 will just need a -5 upgrade, but you might be waiting 30 to 90 more days. ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 09:57:42 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15efzg-0001rA-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 09:57:40 -0700 Message-Id: <3.0.5.32.20010905095949.014062c0@mail.real.com> X-Sender: philba@mail.real.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Wed, 05 Sep 2001 09:59:49 -0700 To: kxt@kxthelp.com From: Phil Barrett Subject: Re: KX-T: dash 5 firmware In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-kxt@nccom.com Precedence: bulk I've asked about the -5 FW on this list recently but got no response. It would also be very interesting to find out *when* they were coming out as well since I holding off on the purchase of an 816 - I would like to start out with something that is current (and not instantly down level). At 09:07 AM 09/05/2001 -0700, David Stanhope wrote: >I have a dash 3 KXTD1232 and am about to purchase the dash 4 roms but was wondering if any hints if will be dash 5 roms and if so can a dash 3 use them and any general idea about when they might be release in the US, don't want to fork out the upgrade fee twice if don't have to. >Thanks >Dave >dms@stanhope.org > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 10:23:54 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15egP2-0001rg-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 10:23:52 -0700 Message-ID: <002201c13630$1375c560$646f6bcf@internet> Reply-To: "robbie" From: "robbie" To: Subject: KX-T: Buffalo New York Installation kxt 74xx installation Date: Wed, 5 Sep 2001 13:27:42 -0400 Organization: TFICOMMUNICATIONS MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001F_01C1360E.8AD15060" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-kxt@nccom.com Precedence: bulk This is a multi-part message in MIME format. ------=_NextPart_000_001F_01C1360E.8AD15060 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, I am looking for a reputable dealer for kxt 816 TVP 200 installation = next week. Please advise with telephone number to=20 robbie@netaxis.ca =20 ------=_NextPart_000_001F_01C1360E.8AD15060 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi,
 
I am looking for a = reputable dealer=20 for kxt 816 TVP  200 installation next week.
 
 
Please advise with = telephone number=20 to
 
robbie@netaxis.ca  =
 
 
------=_NextPart_000_001F_01C1360E.8AD15060-- ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 13:59:10 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15ejlM-0001tu-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 13:59:08 -0700 Message-ID: <20010905205905.51847.qmail@web12007.mail.yahoo.com> Date: Wed, 5 Sep 2001 13:59:05 -0700 (PDT) From: larry Subject: Re: KX-T: KXT Doorphone To: kxt@kxthelp.com In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-kxt@nccom.com Precedence: bulk Jody, I'm sure that the virus was not intentional, there have been several cases of fellow list members getting contaminated. Just a hazard of running MS products. Bad thing is xp reportedly has many more security holes and i'm sure the attacks will only get worse. -larry --- CTI Mail wrote: > That is except for x who sent me an > infected file attached to the > email __________________________________________________ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 14:14:49 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15ek0V-0001uL-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 14:14:47 -0700 Message-ID: <20010905211444.88192.qmail@web12001.mail.yahoo.com> Date: Wed, 5 Sep 2001 14:14:44 -0700 (PDT) From: larry Subject: Re: KX-T: Low volume on KXTD308 To: kxt@kxthelp.com In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-kxt@nccom.com Precedence: bulk Anytime you have static or noise, check for a wiring problem. You could have CO1 connected to line 1 tip and line 2 ring leads. (crossed pairs). The most basic test is to take the 6pos plug out of the ksu CO1/2 jack and plug it into a standard 2500 desk set. If the line is weak or noisy- the problem is toward the central office. If it sounds fine, the problem is on the ksu side (pretty rare for pano equipment). The digital systems don't have the loss problems that older systems had. The telco will always tell you the line is fine. We carry a 2500 in every truck. We will meet the telco at the customer site with the 2500 set in hand when they tell us it's the CPE. -larry --- Jacques Leisy wrote: > The volume is way to low. People are complaining > they cannot hear us, and we have trouble hearing > them as well. > What is the proper setting in the 900 menu for the > CO line attenuation: 0 or 1. The documentation is > not quite clear! > > I had Verizon (!) check the line and according to > them everything is fine up to the CO box. On one of > the CO line I'm also getting a lot of static noise. > > I there anything to adjust (like gain) inside the > TD308? > > Thanks > > JL __________________________________________________ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 16:58:24 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15emYp-0001vp-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 16:58:23 -0700 From: oliviajones@mindspring.com Message-ID: <000e01c13665$e48e1c80$c531fea9@jeeves> To: Subject: KX-T: removal from list Date: Wed, 5 Sep 2001 19:52:59 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000B_01C13644.5D17C740" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-kxt@nccom.com Precedence: bulk This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C13644.5D17C740 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable please remove me from your email subscription list. Thanks. ------=_NextPart_000_000B_01C13644.5D17C740 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
please remove me from your email = subscription=20 list.  Thanks.
------=_NextPart_000_000B_01C13644.5D17C740-- ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 17:28:41 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15en27-0001wJ-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 17:28:39 -0700 Message-ID: <00ce01c1366a$f0889240$0300a8c0@verizon.net> Reply-To: "Charles P" From: "Charles P" To: "kxthelp" Subject: KX-T: TVS dumps callers to main greeting Date: Wed, 5 Sep 2001 20:29:05 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk One customer called today saying that callers that have been transferred into someone's mailbox have been getting dumped to the custom menu while they were leaving a message. i.e. Calls are answered live, (menu picks up after 5 rings), voicemail transfer is done to send caller into a mailbox, they start recording a message, suddenly they are hearing the main menu. Anyone seen that happen before? Possibility is that callers may not really be getting the main menu, that may just be what they think it is by the time the story gets to me. Perhaps the tvs is not hearing them well and thinks they stopped talking and is giving them options. If this is the case, is there a way to adjust the sensitivity? thansk charles ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Wed Sep 05 17:42:16 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15enFG-0001wr-00 for kxt-outgoing@nccom.com; Wed, 5 Sep 2001 17:42:14 -0700 Message-ID: <002101c1366c$94ba74e0$0c00a8c0@bobserver> From: "Bob Bruskin" To: "kxt help" Subject: KX-T: KX-T624 and low volume door box Date: Wed, 5 Sep 2001 20:40:50 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001E_01C1364B.0CCEA180" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-kxt@nccom.com Precedence: bulk This is a multi-part message in MIME format. ------=_NextPart_000_001E_01C1364B.0CCEA180 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have a small business customer with a 624 [recent install] and all = wiring with new CAT5 except the door box was run on 18-4. 2 conductors = were used for the door box and two for a door release. The low volume = is even when the door release is NOT being activated. Any ideas. I did replace the door box once and had some improvement. = Could I have TWO bad door boxes? Thanks. Bob Bruskin Halstead Electronics Ltd. ------=_NextPart_000_001E_01C1364B.0CCEA180 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I have a small business customer with = a  624=20 [recent install] and all wiring with new CAT5 except the door box was = run on=20 18-4.  2 conductors were used for the door box and two for a door=20 release.  The low volume is even when the door release is NOT being = activated.
 
Any ideas.  I did replace the door = box once=20 and had some improvement.  Could I have TWO bad door = boxes?
 
Thanks.
 
Bob Bruskin
Halstead Electronics=20 Ltd.
------=_NextPart_000_001E_01C1364B.0CCEA180-- ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 03:52:55 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15ewmD-00022F-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 03:52:53 -0700 From: "james geelling" Reply-to: hkpana@zfree.co.nz To: kxt@kxthelp.com Date: Thu, 6 Sep 2001 22:52:43 +1200 Subject: KX-T: door phones Message-id: <3b97557b.5833.0@zfree.co.nz> X-User-Info: 203.167.182.49 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-kxt@nccom.com Precedence: bulk Hi everyone. Did someone say they had a schematic of the 30865 door ph box? if so any chance of a copy, I,ve got a dozen or so with different faults we collected over the years. Any help muchly appreciated. James __________________________________________________ Advertise with ZFREE - to find out more click below http://www.zfree.co.nz/about-us/advert.html ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 15:37:39 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15f7mD-0002BS-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 15:37:37 -0700 From: john foster Subject: KX-T: tvs50&kxtd1232 To: kxt@kxthelp.com Message-Id: Date: Thu, 6 Sep 2001 15:37:34 -0700 Sender: owner-kxt@nccom.com Precedence: bulk I think i am missing something, I want 5 phones to ring with dn1 on lines one and two, with all call on a no answer to go to mailbox 101. I have set all the ext to the same ext group and intercept co routing to ext 165. IO have also changed progran 990 sys05 bits 6 and 7 to 0 for call fwd on irna. I have changed hunting type to voice mail tranfer ( system, misc) The ext will go to voice mail if a call is fron inside the system but i can't get it to intercept an outside line. Even made an group mailbox and put all the ext in that as well. Tvs50 with kxtd1232 and dpits thanks john ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 15:54:04 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15f826-0002Bs-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 15:54:02 -0700 From: john foster To: kxt@kxthelp.com Subject: KX-T: tvs50&kxtd1232 Message-Id: Date: Thu, 6 Sep 2001 15:37:34 -0700 X-Note: This E-mail was scanned by Declude JunkMail (www.declude.com) for spam. X-RCPT-TO: X-UIDL: 26 Status: U Sender: owner-kxt@nccom.com Precedence: bulk I think i am missing something, I want 5 phones to ring with dn1 on lines one and two, with all call on a no answer to go to mailbox 101. I have set all the ext to the same ext group and intercept co routing to ext 165. IO have also changed progran 990 sys05 bits 6 and 7 to 0 for call fwd on irna. I have changed hunting type to voice mail tranfer ( system, misc) The ext will go to voice mail if a call is fron inside the system but i can't get it to intercept an outside line. Even made an group mailbox and put all the ext in that as well. Tvs50 with kxtd1232 and dpits thanks john ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 15:56:57 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15f84t-0002CB-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 15:56:55 -0700 From: Panman2424@aol.com Message-ID: <6a.131a1621.28c9590a@aol.com> Date: Thu, 6 Sep 2001 18:56:10 EDT Subject: Re: KX-T: removal from list To: oliviajones@mindspring.com, kxt@kxthelp.com MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: AOL 5.0 for Windows sub 40 Sender: owner-kxt@nccom.com Precedence: bulk no ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 16:00:24 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15f88D-0002Co-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 16:00:21 -0700 From: john foster To: kxt@kxthelp.com Subject: KX-T: tvs50&kxtd1232 Message-Id: Date: Thu, 6 Sep 2001 15:37:34 -0700 X-Note: This E-mail was scanned by Declude JunkMail (www.declude.com) for spam. X-RCPT-TO: Status: U X-Note: This E-mail was scanned by Declude JunkMail (www.declude.com) for spam. X-UIDL: 29 Sender: owner-kxt@nccom.com Precedence: bulk I think i am missing something, I want 5 phones to ring with dn1 on lines one and two, with all call on a no answer to go to mailbox 101. I have set all the ext to the same ext group and intercept co routing to ext 165. IO have also changed progran 990 sys05 bits 6 and 7 to 0 for call fwd on irna. I have changed hunting type to voice mail tranfer ( system, misc) The ext will go to voice mail if a call is fron inside the system but i can't get it to intercept an outside line. Even made an group mailbox and put all the ext in that as well. Tvs50 with kxtd1232 and dpits thanks john ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 16:15:20 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15f8Mg-0002DR-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 16:15:18 -0700 From: john foster To: kxt@kxthelp.com Subject: KX-T: tvs50&kxtd1232 Message-Id: Date: Thu, 6 Sep 2001 15:37:34 -0700 X-Note: This E-mail was scanned by Declude JunkMail (www.declude.com) for spam. X-RCPT-TO: Status: U X-Note: This E-mail was scanned by Declude JunkMail (www.declude.com) for spam. X-Note: This E-mail was scanned by Declude JunkMail (www.declude.com) for spam. X-UIDL: 31 Sender: owner-kxt@nccom.com Precedence: bulk I think i am missing something, I want 5 phones to ring with dn1 on lines one and two, with all call on a no answer to go to mailbox 101. I have set all the ext to the same ext group and intercept co routing to ext 165. IO have also changed progran 990 sys05 bits 6 and 7 to 0 for call fwd on irna. I have changed hunting type to voice mail tranfer ( system, misc) The ext will go to voice mail if a call is fron inside the system but i can't get it to intercept an outside line. Even made an group mailbox and put all the ext in that as well. Tvs50 with kxtd1232 and dpits thanks john ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 18:17:05 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fAGW-0002Er-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 18:17:04 -0700 Message-ID: <000401c1373a$f1721160$fac631c8@apestosa> From: "Catriel" To: "C. Loewen" , References: Subject: KX-T: Re: KXT-TA624 & parallel phones Date: Wed, 5 Sep 2001 16:46:41 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-kxt@nccom.com Precedence: bulk try programming [610] (parallel phone connection) regards ----- Original Message ----- From: "C. Loewen" To: Sent: Monday, August 27, 2001 11:56 AM Subject: KX-T: KXT-TA624 & parallel phones > Hi, > > I am trying to get an SLT and a KX-T7030 phone to work in parallel on a KXT-TA624 hybrid system (analog). > > I have tried two different phones (SLT and KX-T7030), programmed the jack for second phone, swapped out HL and RT wires, and still when I try to get a dial tone on the SLT phone, the speaker phone on the KX-X7030 comes on, no dial tone, just lots o' feedback. > > What's strange is the SLT can answer incoming calls OK, and the KX-T7030 otherwise works fine. Any ideas? > > Thanks! > > C. Loewen > Data Display A/V > www.ddav.com > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 19:18:54 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fBEK-0002Fb-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 19:18:52 -0700 Message-ID: <005701c13743$3a6ddea0$0c00a8c0@bobserver> From: "Bob Bruskin" To: "Harry from Select" Cc: "kxt help" References: <002101c1366c$94ba74e0$0c00a8c0@bobserver> <002301c136c7$6532bba0$6501a8c0@monitor> Subject: KX-T: Re: KX-T624 and low volume door box Date: Thu, 6 Sep 2001 22:17:20 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0054_01C13721.B258D860" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-kxt@nccom.com Precedence: bulk This is a multi-part message in MIME format. ------=_NextPart_000_0054_01C13721.B258D860 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable No! It is the only one on the system. I have don parallels on a 1232D = and each of the two are still louder than this one. Could I have = another defective door box or a bad adapter? Bob ----- Original Message -----=20 From: Harry from Select=20 To: Bob Bruskin=20 Sent: Thursday, September 06, 2001 7:30 AM Subject: Re: KX-T624 and low volume door box do you have that doorphone paralleled with another? ----- Original Message -----=20 From: Bob Bruskin=20 To: kxt help=20 Sent: Wednesday, September 05, 2001 8:40 PM Subject: KX-T: KX-T624 and low volume door box I have a small business customer with a 624 [recent install] and = all wiring with new CAT5 except the door box was run on 18-4. 2 = conductors were used for the door box and two for a door release. The = low volume is even when the door release is NOT being activated. Any ideas. I did replace the door box once and had some = improvement. Could I have TWO bad door boxes? Thanks. Bob Bruskin Halstead Electronics Ltd. ------=_NextPart_000_0054_01C13721.B258D860 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
No!  It is the only one on the = system.  I=20 have don parallels on a 1232D and each of the two are still louder than = this=20 one.  Could I have another defective door box or a bad=20 adapter?
Bob
----- Original Message -----
From:=20 Harry=20 from Select
Sent: Thursday, September 06, = 2001 7:30=20 AM
Subject: Re: KX-T624 and low = volume door=20 box

do you have that doorphone paralleled = with=20 another?
 
----- Original Message -----
From:=20 Bob=20 Bruskin
Sent: Wednesday, September = 05, 2001=20 8:40 PM
Subject: KX-T: KX-T624 and = low volume=20 door box

I have a small business customer = with a =20 624 [recent install] and all wiring with new CAT5 except the door = box was=20 run on 18-4.  2 conductors were used for the door box and two = for a=20 door release.  The low volume is even when the door release is = NOT=20 being activated.
 
Any ideas.  I did replace the = door box=20 once and had some improvement.  Could I have TWO bad door=20 boxes?
 
Thanks.
 
Bob Bruskin
Halstead Electronics=20 Ltd.
------=_NextPart_000_0054_01C13721.B258D860-- ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Thu Sep 06 20:37:09 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fCS2-0002GR-00 for kxt-outgoing@nccom.com; Thu, 6 Sep 2001 20:37:06 -0700 From: Aleksandr Deulin Subject: KX-T: Seem`s like ... . To: kxt@kxthelp.com Message-Id: Date: Thu, 6 Sep 2001 20:37:01 -0700 Sender: owner-kxt@nccom.com Precedence: bulk Hello All! Seems like I`m bored so many people on the net, but I`m really in trouble. I have 2 KX-TD1232 connected in Master/Slave circut. Cool? But when I`m connect 2 X 4 CO line expansion (1/1) and 4 X 16SLT expansion(2X2)and enter right codes in 109 and power down/up my system is working wrong. When CO lines work - SLT doesn`t work and reverse. WHERE IS MY MISTAKE? I`m don`t sleep last night. My boss ready to kill me 8-E HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP! ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 00:55:40 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fGUF-0002J1-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 00:55:39 -0700 From: "Jody's CTI mail" To: "KXT" , "Aleksandr Deulin" Subject: RE: KX-T: Seem`s like ... . Date: Fri, 7 Sep 2001 08:58:46 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk Have you tried setting up the two units individually and see if the work on their own You may have a faulty CCU or a faulty 192 card (system interface) I presume you have set the switch in the slave unit to slave and the master to master? Jody -----Original Message----- From: owner-kxt@nccom.com [mailto:owner-kxt@nccom.com]On Behalf Of Aleksandr Deulin Sent: 07 September, 2001 04:37 To: kxt@kxthelp.com Subject: KX-T: Seem`s like ... . Hello All! Seems like I`m bored so many people on the net, but I`m really in trouble. I have 2 KX-TD1232 connected in Master/Slave circut. Cool? But when I`m connect 2 X 4 CO line expansion (1/1) and 4 X 16SLT expansion(2X2)and enter right codes in 109 and power down/up my system is working wrong. When CO lines work - SLT doesn`t work and reverse. WHERE IS MY MISTAKE? I`m don`t sleep last night. My boss ready to kill me 8-E HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP! ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 01:03:46 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fGc4-0002JY-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 01:03:44 -0700 Message-ID: <20010907080341.70601.qmail@web12002.mail.yahoo.com> Date: Fri, 7 Sep 2001 01:03:41 -0700 (PDT) From: larry Subject: Re: KX-T: Seem`s like ... . To: kxt@kxthelp.com In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-kxt@nccom.com Precedence: bulk make sure both cabinets have the same rom version. -larry --- Aleksandr Deulin wrote: > Hello All! > Seems like I`m bored so many people on the net, but > I`m really in trouble. > I have 2 KX-TD1232 connected in Master/Slave circut. > Cool? But when I`m connect 2 X 4 CO line expansion > (1/1) and 4 X 16SLT expansion(2X2)and enter right > codes in 109 and power down/up my system is working > wrong. When CO lines work - SLT doesn`t work and > reverse. > WHERE IS MY MISTAKE? I`m don`t sleep last night. My > boss ready to kill me 8-E __________________________________________________ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 03:57:48 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fJKV-0002LP-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 03:57:47 -0700 Message-ID: <001201c1378b$d258c7a0$43bdff3e@co.uk> Reply-To: "Mark" From: "Mark" To: "Aleksandr Deulin" , References: Subject: KX-T: Re: Seem`s like ... . Date: Fri, 7 Sep 2001 11:57:00 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-kxt@nccom.com Precedence: bulk Subject: KX-T: Seem`s like ... . > Hello All! > Seems like I`m bored so many people on the net, but I`m really in trouble. > I have 2 KX-TD1232 connected in Master/Slave circut. Cool? But when I`m connect 2 X 4 CO line expansion (1/1) and 4 X 16SLT expansion(2X2)and enter right codes in 109 and power down/up my system is working wrong. When CO lines work - SLT doesn`t work and reverse. > WHERE IS MY MISTAKE? I`m don`t sleep last night. My boss ready to kill me 8-E > > HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP! When you power down / up are you allowing them to have their little "bonding session" without ANY interruptions for a few minutes or so. If you have already done this, please excuse me, but it is surprising how often people take the instructions on the Pans "bonding" with a pinch of salt - yet it is vital to get it right. If there is *ANY* chance of a call coming in, an extension being lifted or a doorphone being pressed etc, wait until the system can be off-line for a while (perhaps late evening?) and then disconnect the CO lines coming in and pull the amphenol connectors which connect up the extensions. Power down both cabinets, wait a few seconds (say 10 ?) until all the relays have dropped out, then check that *NOTHING* can make the system do any work at ALL. Check one is set for slave and one for master and that the link is in place and secure Power the units back on together. Go and have a cup of coffee and an optional fag - take you time. Reconnect amphenol connectors and CO line jacks. Test it again. If there is still problem, get back to the group. Mark ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 05:58:04 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fLCs-0002QI-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 05:58:02 -0700 Date: Fri, 07 Sep 2001 08:58:03 -0400 From: JimMarks Subject: KX-T: Re: Seem`s like ... . To: Aleksandr Deulin , kxt@kxthelp.com Message-id: <000501c1379c$bb2b7da0$b554be18@oemcomputer> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 X-Mailer: Microsoft Outlook Express 5.50.4522.1200 Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT X-Priority: 3 X-MSMail-priority: Normal References: Sender: owner-kxt@nccom.com Precedence: bulk You can install 2 co cards, make sure you have only one in each cabinet. I have never installed a SLT card but if these cards are 16 port each I beleive you can only add one to each cadbinet. YOU CAN'T install 4 of these in a twin cab set-up. The maximum is 64 slts for a twin cabinet. From: "Aleksandr Deulin" To: Sent: Thursday, September 06, 2001 11:37 PM Subject: KX-T: Seem`s like ... . > Hello All! > Seems like I`m bored so many people on the net, but I`m really in trouble. > I have 2 KX-TD1232 connected in Master/Slave circut. Cool? But when I`m connect 2 X 4 CO line expansion (1/1) and 4 X 16SLT expansion(2X2)and enter right codes in 109 and power down/up my system is working wrong. When CO lines work - SLT doesn`t work and reverse. > WHERE IS MY MISTAKE? I`m don`t sleep last night. My boss ready to kill me 8-E > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 08:21:10 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fNRM-0002Ra-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 08:21:08 -0700 From: Dano Subject: KX-T: USR Modem Setting To: kxt@kxthelp.com Message-Id: Date: Fri, 7 Sep 2001 08:21:05 -0700 Sender: owner-kxt@nccom.com Precedence: bulk Looking to connect a USR modem to a KXTD 816 -4 and need to know the dip switch settings. Anyone out there know the answer ? ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 09:35:26 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fObE-0002Sd-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 09:35:24 -0700 From: Bruce Klotz Subject: KX-T: Database file extentions To: kxt@kxthelp.com Message-Id: Date: Fri, 7 Sep 2001 09:35:21 -0700 Sender: owner-kxt@nccom.com Precedence: bulk Does anyone know/remember what file extentions are for what version of software? I have files with the following extentions, and panasonic's answer was "no, I cant tell you because I dont know..." .DBA .DBH .DBI .DBK .DBL thanks bk ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 14:29:18 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fTBc-0002Vw-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 14:29:16 -0700 Message-ID: <003601c137e4$4ea21200$87c531c8@apestosa> From: "Catriel" To: Subject: KX-T: Fw: KXT-TA624 & parallel phones Date: Fri, 7 Sep 2001 18:30:18 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-kxt@nccom.com Precedence: bulk ----- Original Message ----- From: "Catriel" To: "C. Loewen" ; Sent: Wednesday, September 05, 2001 4:46 PM Subject: Re: KXT-TA624 & parallel phones > try programming [610] (parallel phone connection) > regards > > ----- Original Message ----- > From: "C. Loewen" > To: > Sent: Monday, August 27, 2001 11:56 AM > Subject: KX-T: KXT-TA624 & parallel phones > > > > Hi, > > > > I am trying to get an SLT and a KX-T7030 phone to work in parallel on a > KXT-TA624 hybrid system (analog). > > > > I have tried two different phones (SLT and KX-T7030), programmed the jack > for second phone, swapped out HL and RT wires, and still when I try to get a > dial tone on the SLT phone, the speaker phone on the KX-X7030 comes on, no > dial tone, just lots o' feedback. > > > > What's strange is the SLT can answer incoming calls OK, and the KX-T7030 > otherwise works fine. Any ideas? > > > > Thanks! > > > > C. Loewen > > Data Display A/V > > www.ddav.com > > > > > > > > ********************************************************* > > * To unsubscribe, e-mail kxt-request@kxthelp.com * > > * The KXT-Digest Home Page: http://kxthelp.com/ * > > ********************************************************* > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 18:00:53 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fWUN-0002Yp-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 18:00:51 -0700 Message-ID: <009d01c13801$ca291fa0$0300a8c0@verizon.net> Reply-To: "Charles P" From: "Charles P" To: "kxthelp" Subject: KX-T: D308 cable Date: Fri, 7 Sep 2001 21:01:08 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk OK, am I stupid or does the D308 NOT use a nul modem cable? I've only done 2 other D308's and they were a while ago. I tried all combinations with my regular nul modem cable and couldn't even get smdr. (yet the TVS50 programmed fine). (and I didn't bring my usually assortment of cables and adapters.) I tried the Pana software, Programmator, and HyperTerminal. My Pana software would not even let me go to Com 1, so I'm not sure what's up with that, it only gave a choice of com 2. ( I know I asked about that in another post but I forget the answers, it's been a long couple of weeks). The ol' fingers on ext. 101 got me through it all, but something's not right here. tanks charles ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 18:11:13 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fWeN-0002ZD-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 18:11:11 -0700 Message-ID: <009e01c13803$3ca099e0$0300a8c0@verizon.net> Reply-To: "Charles P" From: "Charles P" To: "kxthelp" Subject: KX-T: Phone Systems Direct.com Date: Fri, 7 Sep 2001 21:09:58 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk Installers, If you ever get a call from Phone Systems Direct.com asking for help with installations, just thought I'd let you all know they are very slow to pay (60 to 90 days and lots of excuses). They sell analog TA624's and TVS50's from their web site and have odd people install them. Their usual installers seem to know nothing about TVS voicemails. I helped them with two local jobs (saved the customers for them, customers were quite upset with their systems when I arrived). Yet I've been waiting since May to see my payment. Charles ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Fri Sep 07 19:27:05 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fXpo-0002Zx-00 for kxt-outgoing@nccom.com; Fri, 7 Sep 2001 19:27:04 -0700 Message-ID: <00c201c1380d$d6289a40$0300a8c0@verizon.net> From: "Charles Patterson" To: "kxthelp" References: <000201c13805$887140c0$897ba8c0@nc.rr.com> Subject: Re: KX-T: D308 cable Date: Fri, 7 Sep 2001 22:27:41 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk Thanks everybody for your responses. I'm pretty sure I'm using the same cable that I had used on the previous installs but maybe not. I'll have to check that. Now, why would my 308 pana software only show com2? (com2 is the modem, com1 is the serial port- works fine for d1232's). thanks charles ----- Original Message ----- From: "Michael Karaman" To: "'Charles P'" Sent: Friday, September 07, 2001 9:20 PM Subject: RE: KX-T: D308 cable > This has happened to me in the past and found the problem to be with the > null modem cable. Not all are created equal. I purchased others and > everything works fine. > Mike Karaman > > > -----Original Message----- > From: owner-kxt@nccom.com [mailto:owner-kxt@nccom.com]On Behalf Of Charles P > Sent: Friday, September 07, 2001 9:01 PM > To: kxthelp > Subject: KX-T: D308 cable > > OK, am I stupid or does the D308 NOT use a nul modem cable? I've only done 2 > other D308's and they were a while ago. > I tried all combinations with my regular nul modem cable and couldn't even > get smdr. (yet the TVS50 programmed fine). (and I didn't bring my usually > assortment of cables and adapters.) > > I tried the Pana software, Programmator, and HyperTerminal. > My Pana software would not even let me go to Com 1, so I'm not sure what's > up with that, it only gave a choice of com 2. ( I know I asked about that in > another post but I forget the answers, it's been a long couple of weeks). > The ol' fingers on ext. 101 got me through it all, but something's not right > here. > > > tanks > charles > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > > > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 08 15:36:53 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15fqiZ-0002nj-00 for kxt-outgoing@nccom.com; Sat, 8 Sep 2001 15:36:51 -0700 Message-ID: <003101c138b6$a09afe00$fd03a8c0@kevin> From: "knrmh" To: "Aleksandr Deulin" Cc: "kxthelp" References: Subject: KX-T: Re: Seem`s like ... . Date: Sun, 9 Sep 2001 10:35:54 +1200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-kxt@nccom.com Precedence: bulk Aleksandr, the comments below assume your 1232's are the same as ours and the 2 1232's were twins before you tried to add the 16 cct extn cards Check on the following if you have not already done so. CMD 109, slot (whatever) make A1 and A2 for 16 cct cards in both cabinets. CMD 6--? enable XDP ports. Remember that the DDK plugs have 2 extns on each plug, starting from hole 1 thru 4 (hole 1 & 2 being a pair) and the first 8 extn numbers on the card will take the (old) digital extn number plan and the second 8 will take the analogue extn numbers. If there is no dail tone on the ports a way to check that the card are active is test for side tone (battery) on the ports. Hope this helps ----- Original Message ----- From: "Aleksandr Deulin" To: Sent: Friday, September 07, 2001 3:37 PM Subject: KX-T: Seem`s like ... . > Hello All! > Seems like I`m bored so many people on the net, but I`m really in trouble. > I have 2 KX-TD1232 connected in Master/Slave circut. Cool? But when I`m connect 2 X 4 CO line expansion (1/1) and 4 X 16SLT expansion(2X2)and enter right codes in 109 and power down/up my system is working wrong. When CO lines work - SLT doesn`t work and reverse. > WHERE IS MY MISTAKE? I`m don`t sleep last night. My boss ready to kill me 8-E > > HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP! > > > > ********************************************************* > * To unsubscribe, e-mail kxt-request@kxthelp.com * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From owner-kxt@nccom.com Sat Sep 08 18:54:28 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15ftnm-0002pT-00 for kxt-outgoing@nccom.com; Sat, 8 Sep 2001 18:54:26 -0700 From: "Dan Padilla" To: "KXT Help" Subject: RE: KX-T: Phone Systems Direct.com Date: Sat, 8 Sep 2001 18:48:34 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-Mimeole: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal In-Reply-To: <009e01c13803$3ca099e0$0300a8c0@verizon.net> Sender: owner-kxt@nccom.com Precedence: bulk thanks. -----Original Message----- From: owner-kxt@nccom.com [mailto:owner-kxt@nccom.com]On Behalf Of Charles P Sent: Friday, September 07, 2001 5:10 PM To: kxthelp Subject: KX-T: Phone Systems Direct.com Installers, If you ever get a call from Phone Systems Direct.com asking for help with installations, just thought I'd let you all know they are very slow to pay (60 to 90 days and lots of excuses). They sell analog TA624's and TVS50's from their web site and have odd people install them. Their usual installers seem to know nothing about TVS voicemails. I helped them with two local jobs (saved the customers for them, customers were quite upset with their systems when I arrived). Yet I've been waiting since May to see my payment. Charles ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* ********************************************************* * To unsubscribe, e-mail kxt-request@kxthelp.com * * The KXT-Digest Home Page: http://kxthelp.com/ * ********************************************************* From hostaDmin@www.paketrupiah.com Sun Sep 09 16:47:10 2001 Received: from sinden.nccom.com ([198.51.175.35] ident=exim) by bevo.nccom.com with esmtp (Exim 2.12 #1) id 15gEI7-00034e-00 for true-kxt-outgoing@bevo.nccom.com; Sun, 9 Sep 2001 16:47:07 -0700 Received: from [202.153.226.35] (helo=www.paketrupiah.com ident=root) by sinden.nccom.com with esmtp (Exim 2.12 #1) id 15gEI3-0005CE-00 for kxt-outgoing@nccom.com; Sun, 9 Sep 2001 16:47:04 -0700 Received: (from hostaDmin@localhost) by www.paketrupiah.com (8.11.0/8.11.0) id f89NqTj30100; Mon, 10 Sep 2001 06:52:29 +0700 Date: Mon, 10 Sep 2001 06:52:29 +0700 Message-Id: <200109092352.f89NqTj30100@www.paketrupiah.com> From: newsletter@indo.com To: kxt-outgoing@nccom.com Reply-to: newsletter@indo.com Subject: OrientMagix.com Newsletter -- September 2001 MIME-version: 1.0 Content-Type: multipart/alternative; boundary="====1000079549====" X-Mailer: Perl Powered Socket Mailer This is a multi-part message in MIME format. --====1000079549==== Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8-bit Hi! If you're having problems reading the newsletter, you can now view it online at http://www.orientmagix.com/newsletter0901.html Sincerely, OrientMagix.com --====1000079549==== Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Asia Travel Asia Hotels - Asia Pacific Hotel & Travel
If you're having problems reading the newsletter, you can now view it = online at = http://www.orientmagix.com/newsletter0901.html
3D"Living
September. 7th 2001
Looking for hotel with a serene and private setting in Phuket? Then che= ck out Banyan Tree Phuket, the epitome of luxury. From the serenit= y of its luxuriously appointed villas to the quiet pleasure of its w= atercourse, gardens and landscaped golf course, tranquillity and relaxation= surround you.... more

RajaCr= aft.com provides the broadest selection of finely selected Indonesian= arts & crafts products at great prices, conveniently available in = an online marketplace

 

Welcome to the magix of Asia !
Find your dream hotels in your dream destinations: Bali, Phuket, L= angkawi, Singapore, Vietnam, and more. For Business or pleasure. Real = time. 3 Clicks. Absolutely FANTASTIC RATES! OrientMagix.com is desi= gned to give the most convenience to Internet travellers.
Travellers can choose their hotels from thousands hotels thro= ugh out Asia. We are definitely the best choice for Internet trav= ellers to visit gorgeous places in Asia.
You are registered as a member of our parent site, Indo.com. = This is our premiere newsletter. If you wish to stop receiving our= monthly special offer, please enter your email in the unsubscribe not= ification field below.

Thank you and Warm Regards,
OrientMagix.com team.


Save up to 80% and reserve room in Thailand, = Singapore, = = Vietnam, = Lao= s, = Cambodia, = Indonesia<= /a>, = Malaysia instantly with over 500 hot hotel deals, from US $20.



The words Ana Mandara mean "beautiful home for the gue= sts." In that spirit, the Ana Mandara Resort Vietnam rests in harmo= ny with Nha Trang's natural beauty.Located directly on the beach= , the Resort is set on 20,000 square meters of private tropical gar= dens overlooking the ocean. The resort's 16 villas, with a total o= f 68 rooms, are complimented by a stunning view of Nha Trang Bay. = Each room has its own covered terrace and all modern amenities...<= a href=3D"http://www.orientmagix.com/hotels_vietnam/ana_mandara">more

Jakarta, Indonesia
Local and overseas artists share creativity, innovations in Art Summi= t Indonesia III
JAKARTA (indo.com): Travellers to Jakarta will have a special treat whe= n scores of music, dance and theatre groups from different countries pre= sent their works in Art Summit Indonesia III. The international-scal= e contemporary performing arts extravaganza, which kicked off on August 27, wi= ll run though September 27, 2001..... more
= Best offer for family holidays with many choices of hotels tailored = to family needs, visit ww= w.baliforfamily.com now!

Virtual Bali, Beam yourself up to experience the exotic Bali on the n= et!! Transporter....engage!
You can get many = special offer and discount from hotels around the world here!
Panwaburi Phuket
"83% off"
Holiday Inn Crowne Plaza Bangkok
"68% off" <= /td>
= Boulevard Park Plaza, Jakarta
"67% off" <= /td>
Le Meridien Singapore
"61% off"
Diwangkara, Sanur, Bali
"40% off"
Kuta Paradiso, Kuta, Bali
"35% off"<= /font>
Melia Hanoi
"63% off"<= /font>
Novotel Vientiane Laos
"64% off"<= /font>

=
cooking corner prepared by
Chef Hinz Von Holzen
Bali, Indonesia

Get monthly updated MagixOffer in Asia? Please enter your email= here:

developed, designed, and maintained by indo.com =A9 2001. all rights reserved.=
--====1000079549====-- From owner-kxt@nccom.com Sun Sep 09 23:35:06 2001 Received: from majordom by bevo.nccom.com with local (Exim 2.12 #1) id 15gKeu-00038O-00